Mail Form
Home > Nova > Exterior Equipment > Legs & Camper Jacks
Products

Legs & Camper Jacks

Legs & Camper Jacks

Product Listing

Showing 1 - 11 of 11 Results Sort by
Aluminium jacks, holds max, load of 1000kg each. Sold in packs of 4. Adjustable in height from min 28cm to max 43cm. Each weighs only 0.9kg.

Aluminium jacks, holds max, load of 1000kg each. Sold in packs of 4. Adjustable in height from min 28cm to max 43cm. Each weighs only 0.9kg.

In stock
Galvanised brace 665mm long, used to wind Alko corner steadys down on Caravans or Motorhomes.

Galvanised brace 665mm long, used to wind Alko corner steadys down on Caravans or Motorhomes.

In stock
Galvanised brace 865mm long, used to wind Alko corner steadys down on Caravans or Motorhomes.

Galvanised brace 865mm long, used to wind Alko corner steadys down on Caravans or Motorhomes.

In stock
Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis / outrigger. The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange. Lock in place using tommy bar supplied. To release, apply pressure with toe on flange then raise back to stowed position. Both sizes of Camper jacks are sold as pairs. Mounting bracket 10cm x 5cm.

Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis / outrigger. The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange. Lock in place using tommy bar supplied. To release, apply pressure with toe on flange then raise back to stowed position. Both sizes of Camper jacks are sold as pairs. Mounting bracket 10cm x 5cm.

In stock
Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis / outrigger. The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange. Lock in place using tommy bar supplied. To release, apply pressure with toe on flange then raise back to stowed position. Both sizes of Camper jacks are sold as pairs. Mounting bracket 10cm x 5cm.

Simple installation either through two mounting bolts on the top of the leg fixing bracket or via welding a bracket to the chassis / outrigger. The leg is held in a horizontal stowed position. To release, pull leg from locating notch and allow inner telescopic leg to extend by placing toe on release flange. Lock in place using tommy bar supplied. To release, apply pressure with toe on flange then raise back to stowed position. Both sizes of Camper jacks are sold as pairs. Mounting bracket 10cm x 5cm.

In stock
The Vero-Light steady legs are simple to fit and easy to use.  They are securely bolted to the chassis member and feature hardened galvanised spindle providing telescopic extension and a foot to provide a sturdy platform to support the rear of the vehicle.  The steady legs are lightweight, weighing less than 4.5KG per pair (double ext version).  This represents a weight saving of around 50% compared to the equivalent steel steady legs.

• Low weight, each leg only 2.1kg in weight • Use of the latest materials such as aluminium and fibre reinforced plastic• Special, dirt repellent, protective coating • Robust, external casing• From 330mm - 510mm • Lowering mechanism length: 220mm• Capacity: 500KG.

The Vero-Light steady legs are simple to fit and easy to use. They are securely bolted to the chassis member and feature hardened galvanised spindle providing telescopic extension and a foot to provide a sturdy platform to support the rear of the vehicle. The steady legs are lightweight, weighing less than 4.5KG per pair (double ext version). This represents a weight saving of around 50% compared to the equivalent steel steady legs.

• Low weight, each leg only 2.1kg in weight • Use of the latest materials such as aluminium and fibre reinforced plastic• Special, dirt repellent, protective coating • Robust, external casing• From 330mm - 510mm • Lowering mechanism length: 220mm• Capacity: 500KG.

In stock
The Vero-Light steady legs are simple to fit and easy to use.  They are securely bolted to the chassis member and feature hardened galvanised spindle providing telescopic extension and a foot to provide a sturdy platform to support the rear of the vehicle.  The steady legs are lightweight, weighing less than 4KG per pair for the single extended version.  This represents a weight saving of around 50% compared to the equivalent steel steady legs.

• Low weight at less than 4KG per pair • Use of the latest materials such as aluminium and fibre reinforced plastic• Special, dirt repellent, protective coating • Robust, external casing• From 310mm – 430mm • Lowering mechanism length: 155mm• Capacity: 500KG.

The Vero-Light steady legs are simple to fit and easy to use. They are securely bolted to the chassis member and feature hardened galvanised spindle providing telescopic extension and a foot to provide a sturdy platform to support the rear of the vehicle. The steady legs are lightweight, weighing less than 4KG per pair for the single extended version. This represents a weight saving of around 50% compared to the equivalent steel steady legs.

• Low weight at less than 4KG per pair • Use of the latest materials such as aluminium and fibre reinforced plastic• Special, dirt repellent, protective coating • Robust, external casing• From 310mm – 430mm • Lowering mechanism length: 155mm• Capacity: 500KG.

In stock
Plastic UV-resistant jacks, in grey. Max load 750kg each. Half the weight of Alu Jacks. Sold in packs of 4. Adjustable in height from min 31cm to max 44cm. Each weighs only 0.8kg.

Plastic UV-resistant jacks, in grey. Max load 750kg each. Half the weight of Alu Jacks. Sold in packs of 4. Adjustable in height from min 31cm to max 44cm. Each weighs only 0.8kg.

In stock
Kit of 4 highly reinforced anti-sinking plates. Colour – Grey. Dimensions: ø20cm.

Kit of 4 highly reinforced anti-sinking plates. Colour – Grey. Dimensions: ø20cm.

In stock
Kit of 4 anti-sinking bases supplied with 4 locks to be fastened to the vehicles lifting jacks. Permanently secured even when travelling. Colour Grey. Dimensions: 19x14.5cm

Kit of 4 anti-sinking bases supplied with 4 locks to be fastened to the vehicles lifting jacks. Permanently secured even when travelling. Colour Grey. Dimensions: 19x14.5cm

In stock
Showing 1 - 11 of 11 Results Sort by